Features
- Approved to the ANSI/ISEA 121-2018 standard
- Cold Shrink technology requires no heat source
- EPDM rubber resists acids and extreme temps
- No other tools needed to create secure connection
- Tool diameter range of 1.25in - 1.75in // 32mm - 45mm
- Used w/ Tool Tail™ creates retrofit tether point
- Maximum safe working capacity: Up to 10lbs // 4.5kg
- Patented design
Application
- Telecommunications
- Municipalities
- Construction
- Utilities
- Wind Energy
- Oil & Gas
- Power Generation
- Railway
GEAR IN ACTION
Customer Ratings and Reviews
-
Tenacious
TesterKirk Meyer
One of the easiest and strongest (non-built in) traps around! If you need serious traps for tools you are using every day, I'd say pass on the tape and go right to these; you'll thank yourself. Fairly easy to put on and these are so tough, it took me 5 min just to cut it off (had to give the tool back :-( ). The trap also provides fantastic grip where other tapes might be on the smoother side.
Check out more reviews at www.civilgear.wordpress.com
Please Note: This review is of product that was provided to the user free of charge.
-
Tenacious
TesterKirk Meyer
One of the easiest and strongest (non-built in) traps around! If you need serious traps for tools you are using every day, I'd say pass on the tape and go right to these; you'll thank yourself. Fairly easy to put on and these are so tough, it took me 5 min just to cut it off (had to give the tool back :-( ). The trap also provides fantastic grip where other tapes might be on the smoother side.
Check out more reviews at www.civilgear.wordpress.com
Please Note: This review is of product that was provided to the user free of charge.
