The Squids 3169 Warehouse Racking Beam Stabilizer Strap makes assembly and disassembly safer and easier. Designed for single-person use, it helps prevent dropped beams and guards against common warehouse hazards.

Preparing for application:

1. Ensure the primary anchor is clean, dry and free of grease, oil or other substances during application of the strap.
2. Read the instructions and warnings completely before and during assembly.

Instructions for installing:

1. Remove the bolts from the beam.
2. Wrap one strap around the beam by threading the metal hook through the loop.
3. Hang the hook on a teardrop, ensuring there is some slack on the line.
4. Repeat steps 1-3 on the other end of the beam.
5. Put the safety clip on one end of the beam. Tap the beam up and pull it forward, letting the strap support it. Repeat this process on the opposite end of the beam.
6. While holding one end of the beam, remove the strap and lower it to the floor. Repeat this process on the opposite end of the beam.
7. Raise the beam to your desired height, supporting it with the strap attached to the upright. Repeat on the other end of the beam.
8. Ensure the beam is secured in place before removing the straps.