Skullerz 8991 Safety Helmet Visor

three quarter view of 9001 clear anti-fog safety helmet visor image 1
8991 safety helmet visor on safety helmet
Safety helmet integration: install on Skullerz safety helmet for increased eye and face protection
Permanent Fog-Off: Anti-fog technology will not wash or wear off
UV protection + scratch-resistant: Hardcoat lens delivers maximum scratch resistance & 99.9% UV ray protection. Icons in upper right hand corner say Tena-Coat Armor and EN166
Picture of safety helmet with visor and icons in low right read: Impact resistant; MIL-PRF, and ANSI compliant.
Available in smoke and clear
Safety helmet sold separately: includes visor and all attachment hardware
front of visor image 2
hardware image 3
thumbscrews image 4

Skullerz 8991 Safety Helmet Visor

Regular: $55.05
Availability: IN STOCK
Item#: 60208
  • DESIGNED FOR SAFETY HELMET INTEGRATION – Easily mounts on Skullerz Safety Helmet for increased eye and face protection (attachment hardware included)
  • IMPACT RESISTANT – Meets ANSI Z87.1+, CSA Z94.3 & MIL-PRF 32432A Ballistic Impact
  • PERMANENT FOG-OFF - Anti-fog technology for clear sight in any condition, will not wash or wear off
  • SCRATCH-RESISTANT TENA-COAT – Durable hard coat tested to EN166 Scratch Resistance
  • UV PROTECTION – Lens blocks 99.9% of harmful UVA, UVB and UVC rays

California Residents: read Proposition 65 .

View Spec Sheet

The Skullerz Safety Helmet (8974, 8974LED, 8975, 8975LED). The visor features a UV protective z87 lens with a permanent anti-fog and a scratch-resistant hard coat tested to EN166.


This visor is designed to be an accessory attachment to the Skullerz Safety Helmet (8974, 8974LED, 8975, 8975LED). Use the included attachment hardware to seamlessly integrate into a dedicated mounting location on the Safety Helmet.


The visor lens features a permanent Fog-Off hard coat provides durable scratch-resistance, and UV protection filters 99.9 percent of harmful UVA, UVB and UVC rays to keep eyes safe in the sun.


This impact-resistant safety visor is tested to EN166 Anti-Fog, EN166 Scratch Resistance, ANSI Z87.1+ High-Velocity Impact Protection and optical requirements. ANSI Z87.1 is the US standard for Personal Eye and Face Protection Devices and is listed on the frame.

This visor is also tested to MIL-PRF-32432A Ballistic Fragmentation, Class 1, which is the US Military Combat Eye Protection System Performance Specification for eyewear. To pass the military standard, safety glasses must withstand a steel projectile shot at 660 ft / 201m per second which is 4x faster than the Z87+ standard. Lenses must not puncture, crack or shatter. Frames must retain the lenses and not break.

Approximately 2,200 workers suffer from eye injuries requiring medical treatment each day and, of those injured workers, 3 out of 5 were not wearing eye protection and over 100 required time away from work.

When installed on a Skullerz Safety Helmet, the 8991 Safety Helmet Visor adds significant eye and face protection for those working at heights, as well as construction & utility job sites, oil & gas, road work, forestry, mining and general site work.

How to Install Skullerz 8991 Safety Helmet Visor on a Skullerz Safety Helmet

Recently Viewed Products