Squids 3100F(x) Tool Lanyard - Carabiner + Loop - 10lbs

Front of lanyard
Tether tools at heights: prevent dropped objects. Image shows tower climber with all tools tethered
Tested & approved: meets ANSI/ISEA 121-2018 standard for dropped object prevention. Image shows lanyard attached to scissors. Icons on bottom right say “max. Load limit 10lbs/4.5kg)” and “ANSI/ISEA 121”
Shock absorbing: lessens force on body or anchor point if drop occurs.
Durable: 1680D polyester elastic blend. Image shows lanyard attached to tool and detail on elastic.
Aluminum alloy manual-locking carabiner: captive eye predicts load direction and prevents lanyards/carabiner disconnection during use. Image shows hand opening carabiner.
Treaded loop: Securely grips tool. Image shows loop end attached to tool with captive hole.
Size chart. Standard size is 38-48in(96-122cm) in length
Lanyard attached to tool hanging
Lanyard attached to screwdriver using 3740
Lanyard tethered to hammer using 3713 tool tail and 3755 tape
Lanyard attached to channellocks using 3755 tape and 3700 tails
Lanyard attached to tape measure trap with 3770 tape measure trap
Lanyard tethered to phone using 3760 phone pouch
Lanyard attached to drill using 3780
Lanyard attached to WD-40 using 3775 trap

Squids 3100F(x) Tool Lanyard - Carabiner + Loop - 10lbs

Regular: $11.75
Size Chart
Availability: IN STOCK
Item#: 19802
  • Approved to the ANSI/ISEA 121-2018 standard
  • Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs
  • Durable 1680 denier polyester elastic blended webbing extends from 38-48in (96-122cm)
  • Lightweight design reduces snag hazards and added weight
  • Anodized aluminum alloy carabiner with captive eye
  • Treaded loop end that grips the tool when attached
  • High strength 3-ply nylon stitching secures connecting ends
  • Single length construction eliminates weak points seen with multi-component lanyards
  • Third party certified to a 10lbs (4.5kg) maximum capacity with 2:1 safety factor
  • Patented design

California Residents: read Proposition 65 .

Product Spec Sheet

Shock absorbing tool lanyard with carabiner on one end and loop on the other end: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below.

Recently Viewed Products