Squids 3156 Coiled Tool Lanyard with Single Carabiner - 2lbs / 0.9kg

Tool lanyard
Securely tether tools and hard hats: tested & approved to ANSI/ISEA 121 for dropped object prevention.  Maximum load limit: 2lbs / 0.9kg. ANSI/ISEA 121.
Manual locking screw gate carabiner: for easy, secure connection to tools or anchor points. Image shows hand opening carabiner and image on right shows lanyard attached to Tool Trap and screwdriver and text reads, “Slips Hand Tool Trap sold separately.”
Flexible loop end: easily connects to captive holes, retrofit attachment points and hard hat accessory slots. Image shows lanyard attached to pliers with tape and tails. Text says “Tool Tail and Tape sold separately.”
Low-profile coil lanyard: reduces snag or tangle hazards.
Size chart. Standard size is 12-48in (30-122cm).
Lanyard attached to 3740 Tool Trap and screwdriver
Lanyard attached to cutter with 3700 Tool Tails and 3755 Tape
Lanyard attached to 3760 Cellphone Holder and cellphone

Squids 3156 Coiled Tool Lanyard with Single Carabiner - 2lbs / 0.9kg

Regular: $8.75
Size Chart
Availability: OUT OF STOCK
Item#: 19161
  • MEETS ANSI/ISEA 121-2018 – Third-party certified to 2lbs // 0.9kg maximum working capacity with a 2:1 safety factor
  • SECURELY TETHER TOOLS& HARD HATS– Flexible loop end connects to captive holes or retrofit attachment points on tools and accessory slots on hard hats to prevent drops
  • MANUAL LOCKING SCREW GATE ALUMINUM CARABINER – For easy, secure attachment to tools and anchor points (belts, d-rings, etc.)
  • LOW-PROFILE COIL LANYARD – Reduces snag or tangle hazards
  • DURABLE – Plastic coil and aluminum carabiner are built to withstand harsh conditions
  • LANYARD DIMENSIONS – 12–48in // 30–122cm

California Residents: read Proposition 65 .

Product Spec Sheet

The Squids 3156 Coiled Tool Lanyard with Single Carabiner securely tethers hand tools, hard hats and other small gear to prevent them from becoming dangerous dropped objects when working at heights. With a manual locking screw gate aluminum carabiner on one end and a flexible tethering loop on the other, this versatile coil lanyard provides a variety of options for secure connection to anchor points as well as captive holes or retrofitted attachment points on tools. The low-profile coil design stays out of the way to reduce snag or tangle hazards. Tested and approved to ANSI/ISEA 121 for dropped object prevention.

This coiled lanyard is ideal for construction, telecom, oil and gas, power generation, utilities, wind, manufacturing, municipalities and scaffolding.


Rigorously tested and approved to the ANSI/ISEA 121-2018 standard and third-party certified to 2lbs // 0.9kg maximum capacity with a 2:1 safety factor to prevent falling objects.

All tool lanyards are built to withstand defined weight limits and are easy to use by any worker to avoid accidental dropped objects that could cause damage, injuries or possibly death. Safety lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety.

Recently Viewed Products